Yep, it finally happened– I failed spectacularly on a Pinterest project. Thought you might enjoy the laugh on this Friday.
Can you believe the summer is over and football season has started? I refuse to accept the end of summer because I didn’t get nearly as many things accomplished as I wanted (I’m looking at you unread Game of Thrones book set).
But fall means pumpkins, sweaters, and no more mowing the lawn which I am eagerly anticipating. This Sunday the Philadelphia Eagles open the season at 1PM and we will be in front of television eating a tasty snack. If you are as excited for the season as Greg is, consider making one of these snacks to enjoy during the game.
Now on to the Five!
Over the past few months I’ve been struggling with my work/life/blogging balance and I’ve come to the conclusion I can’t be a regular blogger anymore. I love sharing our project and meals with you but the time required for each post overwhelms me due to the fact there is only 24 hours in a day. The time required to processing photographs, write, and edit a typical post is roughly four hours.
The biggest sign I needed a break came when I made a ton of new recipes for our BBQ and I didn’t photography any of them. Just thinking about the time to edit the food pictures on top of editing the office project pictures made me want to hide under the covers.
Please know that I will continue to share our projects with you but not on a twice/thrice weekly basis. Probably once a week or so.
Side note: I do have a fabulously pineapple upside down cake to share with you next week.
So what will I be doing with my new found time? Well, I loaded up my Nook with some great books to read, started watching Orphan Black, walk Hazel more, and promised Greg not to completely load up our weekend with plans.
I love libraries and can get lost in one (willingly) for hours. There was a great feeling to thumb through a card catalog to see if they had the book you wanted to read and after finding it’s location, you’d set out on the ultimate journey– to find the book. As libraries converted to digital card catalogs, a few savvy buyers snatched up the card catalog relics. As much as I love them, I hated their non-existent practicality. I don’t need a piece of furniture with 30 small drawers, I need a real drawer with space to hold something wider than a CD case. Then I stumbled on one a person converted and told Greg we could do that. Sure, he didn’t have as much faith as I did but just look at the Before/After– I think we nailed it. Three and a half months after the chest of drawers entered our home, we finally finished converting it to a bookcase with faux card catalog front and it’s love– just look at those drawer fronts (hardware by D.Lawless Hardware). I wanted a piece of fun furniture for my new office and something that wasn’t just a bookcase from Target. Our completed bookcase added personality and life into the room, along with a sense of whimsy. It reminded me of endless hours at the library and getting lost in a book. Sure, my office isn’t anywhere near done but I have this lovely piece of furniture to highlight one of my favorite things from this year– the watercolor of my Grandmom’s house from The Art of Michelle and our engagement picture by April Ziegler Photography. No matter what, this bookcase is a sign of progress in one of our slowest moving projects ever. We found the ideal piece of furniture at Impact Thrift when we went for a different office furniture related purchase. Walking around, we stumbled upon this dresser for the whopping price of $60. Both of us loved the rounded edging but then Greg opened the bottom drawer to reveal a hidden cedar chest.
We knew we had to have it since you can’t find furniture like this anymore. One coupon later, the chest was ours for $45. Add $35 in hardware, $30 in paint, another $25 in wood and you have an amazing custom piece of furniture. Now you can do it too and I’ll tell you how.
What You Will Need
|Dresser||Miter saw||Brass Knobs|
|Clamps||Nail gun||Cup pull label holders|
|Circular saw||Wood glue||Primer|
|Crow bar||Wood filler||Paint|
|Rubber Mallet||4″ lattice strips||Fabric|
|Sander||1/2″ half round trim||Foam Core|
1. Find a dresser which meets your desired dimensions. When picking a dresser, look at the drawers and determine how the height/length will work for your faux card catalog front. For example– do you want more square drawers fronts with fewer pulls or do you want it similar to mine with a more traditional size card catalog front. 2. Buy your dresser. We loved this chest due to the trim going around it and how the bottom drawer was a mini cedar chest. 3. We wanted to turn the top into a bookcase, to do that we removed the top two drawers. If you don’t want to turn it into a bookcase, skip this step. To remove the support systems, we used the crow bar to gently ease everything out. You don’t want to go all Wreck-It Ralph on the chest because you want to maintain the integrity of the piece. 4. Once you are finished, you will have a structure that looks like this. Wood fill and sand any holes in the bookcase area. Repeat the wood fill/sanding any scrapes/dents/dings in the outside of the piece. Side note: Ignore the completed drawers, my instructions differ from how we completed it. If it wasn’t the middle of winter when starting it, we would have followed it this way. 5. As you can see from the above picture, we need to do two things– extend the bookcase ledge to meet the edge of the drawer and to create a flat surface for the shelf base. 6. We installed a piece of lumber (trimmed to fit length and width). Cut and nail in place. 7. Then we measure the inside base to cut our piece of 1/4″ plywood. We had extra plywood from the bathroom refresh and cut it using the circular saw. Nail in place. 8. Add trim to hide the edges of the plywood and lumber. We wanted to add decorative trim to match the trim on the chest, so we measured the depth needed for the trim when cutting out the piece of lumber and plywood. We nailed the trim after installing the plywood. 9. Wood fill/sand again! 10. It to start on the drawers– decided your faux drawer size. To determine the size, I played around with paper I had and it helped me visualize what each front would look like. 11. Remove all hardware. 12. Wood fill/sand the holes. 13. Cut your faux fronts and one extra. We used 4″ lattice which meant we just needed to cut it with the miter saw to the desired length. The extra one will act as a template when you install the hardware. Don’t skip it because it will save you time. 14. After you cut the fronts, you will need to sand down the corners and edges to give it a worn look. As you can see from the picture below, the sanded piece (bottom) looks much nicer and more finished than the raw edge (top). 15. If you’re like me and completely excited about the project, you’ll want to see what the drawer will look like with the fronts and hardware– play around with it. Ahhh it’s love already. 16. Not going to lie or sugar coat it, gluing the fronts was our least favorite party of the entire project. To start draw a line down the center and find the drawer’s center point. 17. To keep everything even and straight, we propped the drawer sideways on the island. We clamped a yard stick down the center to ensure even spacing between the “drawers”. Then we determined the distance we wanted each “drawer”- the width of two paint stirrers. After we determined all of this (using math to find the extra space all around and divide it evenlyish), we started gluing. 18. Apply a small amount of glue and use a level to verify straightness. Clamp in place. The whole reason the drawer is up like this is because we used Ms. Level on each “drawer”. 19. Over the course of several days, glue/clamp all the “drawers”. 20. Realize that you picked a very complicated project. 21. Drink a few beers and avoid the project. 22. Prime everything (two coats)! We used BIN primer due to other bloggers loving it– be aware, it’s very runny. 23. Start painting. We used Benjamin Moore Advance paint which is highly durable and meant for cabinets. The only downside to the paint besides costs is the 16 hour wait time between coats. 24. Question bloggers after first coat due to it not looking good. 25. Apply the second coat. Still question the bloggers and google the paint. 26. Apply third coat and be overly happy with how it looks. Dance to Pharrell Williams because your happy. 27. Remember the template piece you cut in step 13? Well, go find it because it’s time to apply hardware. Place the hardware on the template and mark where you need to drill. Drill your holes. 28. Mark holes on each “drawer” and start drilling. 29. Screw in your hardware. We thought this would be a quick afternoon project– three hours later, we were still at it. 30. Time for the bookcase backing. Measure the back of the bookcase and deduct a quarter inch from the length and width. 31. Cut the foam core to that size 32. Wrap in batting and staple gun down. Test it in the bookcase to ensure the fit. 33. Wrap it in fabric and staple it down. 34. Insert backing, add the drawers. 35. Sit back and realize you nailed it like the Bellas at Finals.
When I moved in with Greg, I had two rules—
- I’ll do the laundry if he cleaned the bathrooms.
- We divide up the week for cooking dinner.
We did great adhering to the dividing the cooking but suddenly stopped succeeding at it, mostly because Greg isn’t allowed to go to the grocery store alone due to his tendency to purchase more junk food than a 13 year old boy.
Side note: To be fair, he washes and dries the dishes when I cook.
With grad school complete, I decided it’s time to ease him back into cooking by making us dessert—a coconut custard pie. Now I call this recipe Coconut Dream Pie because it’s so easy for your husband to make, it must be a dream. If you can use a blender, you can make this pie.
Heck, you can even have your little ones helps make this dessert. Once it’s baked, no one will ever guess how easy it was to make. Please feel free to tell them you slaved over it for hours. The pie is surprisingly light for a custard pie and it forms three distinct layers which makes it even more interesting.
Hope you enjoy it!
Coconut Dream Pie (adapted from Jo Cooks)
- 2 cups milk
- 1 cup shredded coconut (sweetened)
- 2/3 cup sugar
- 4 eggs
- 1 tsp vanilla
- ½ cup flour
- 8 tbsp of butter (cold or room temperature)
- Pinch of salt
- Pinch of ground nutmeg
1. Place everything into the blender.
2. Blend until smooth.
3. Pour into a pie dish.
4. Bake for 45-60 minutes at 350 degrees.
Ahhh it’s Friday. I don’t know about you but it’s been a few long weeks. Since it’s St. Patrick’s Day Weekend, it’s time to get festive. You’ll notice I’ve used the word festive quite a bit in today’s post– feel free to turn it into a St. Patrick’s Day drinking game, every time you read the word “festive” take a shot.
Hazel’s already to celebrate the holiday by introducing today’s Five on Friday.
This is a simple project to make your house a bit more festive for St. Patrick’s Day– all you need are some stick pins, Styrofoam balls, and festive fabric. I can see these looking great in a giant hurricane on a sideboard. Heck, these would be great for all the seasons– just head to Joann’s and pick up some fabric.
If you’re looking for easy and festive– just print out these St. Patrick’s Day print outs and put in a frame. It’s easy to do and adds a ton of cheer. Don’t have a color printer? Just send to FedEx Kinkos to have them print it for you.
Perfect to send with your little one to school or perfect to send with your big one to work. This recipe meets my criteria– it’s easy, it’s fun looking, and it’s bound to make people smile.
5. Sparkling Pinot Grigio with Green Gummy Bears
After a hard day of crafting or cooking for St. Patrick’s Day, it’s time to treat yourself. Just add a few green gummy bears to your glass and pour sparkling pinot over it. Festive and fun!
Have a great weekend!